Hiller Rotorcycle, Ultralight Personal Helicopter 1957

Small enough personal helicopter when folded to carry in a pod under an aircraft's wing or on the luggage rack of your car, this contraption becomes a full sized helicopter in a matter of minutes - capable of taking off from your backyard and flying anywhere in the San Francisco Bay Area on a single tank of gas. In1954 Hiller Helicopters was selected by the Navy's Bureau of Aeronautics to build a one man, foldable, self-rescue and observation helicopter. The Hiller Model 1033 was designated by the military as the XROE-1 "Rotorcycle." Two prototypes were built at the Hiller Helicopter Plant in Palo Alto, California. The helicopter has the Hiller Rotormatic control paddles with a conventional tail rotor. Power was supplied from a Nelson H-59, two cycle, 40 hp, four cylinder opposed air cooled engine through a centrifugal clutch. The prototype Rotorcycle first flew on January 10, 1957. Hiller Helicopter Plant in Palo Alto, California, USA Basic Data Main rotor dia. 18.50 ft. Tail rotor dia. 3 ft. Overall length 18.50 ft. Maximum height 92 in. Gross weight 546 lbs. Empty weight 290 lbs. Useful load 270 lbs. Performance Characteristics Maximum speed (sea level) 70 mph Cruising speed 52 mph Rate of climb 1160 ft/min Effective range 30 miles Range at sea level (with 170 lbs. pilot and 86 lbs. of fuel) 166 miles ---

More review : Buy Best Price Best Buy Netbook 10.1 Inch Hello Engineering Plan and Layout for Construction

Constructing A Personal Backyard Shed Storage Building To Free Up the Garage

Having your own backyard shed storage structure is the next best thing to pie a-la-mode when it's crafted with fresh peach pie. Our current house is the result of my wife's storage desires. Before buying, she checked every room to make sure there was enough storage for all our "necessities". I really do wish I had the same foresight concerning my new garage. Now that we are in the house, that garage is stuffed to the gills with my stuff. That's why I decided to look into building my own backyard storage shed.
The most important thing I wanted in this shed was to be able to access my "stuff" whenever I needed it. I really did not want to have to pull everything out to get to the stuff in the back so I designed my shed with two set of doors, both in the front and in the back as well.
This particular added towards the overall cost and got somewhat longer to construct however ended up being well worth the purchase. There is nothing a whole lot worse compared to desiring one thing and not being able to get to that. Together with a couple of list of entrance doors on each side My spouse and i don't acquired to concern yourself with the idea.
Of course this limited where I could put the structure. Most folks back their shed right up to the property line but I needed to access both ends so I just turned it sideways. It is important to remember to take the necessary time to make sure the ground is level where the shed will be placed.
The foundation is also extremely important. It needs to be able to stand the test of time and withstand lots of use (or misuse). Depending on the size of your building you may need to use a permanent foundation consisting of piers installed below grade level. You also may need to get a permit so check your local building codes as well. You truly don't want to entertain a visit from the local building inspector telling you your building is not up to code AFTER you are done.
To stop problems with constructing rules and also nearby officials, you could think about obtaining some making plans to your outdoor storage shed on-line.
One of the best investments I have ever made was in my backyard storage shed. I have plenty of room in my garage now and when I need something I can get my hands on it in no time now because of the easy access.

See more : Security Gadgets Civil Engineering Design Review LCD 1080p HDTV